Panasonic BL-PA100KTA Ethernet Adaptor Starter Pack Includes two HD-PLC (High Definition Power Communication) Review

Average Reviews:

(More customer reviews)I researched competing products from DLink and NetGear online and read numerous reviews. Any of the HD-PLC products should perform similarly in the same situation. Before deciding on a powerline Ethernet product be sure to understand that the quality of your home wiring and the distance the signal must travel all can affect the performance of the product. Poor quality wiring or very long electrical runs may limit performance.
What I liked most about the Panasonic product is that the kit which includes two units is preconfigured, so it works right out of the box without any special configuration. I didn't have to install ANY software to get my network running. I plugged in one unit to my Internet router, and the other unit into a power outlet in a nearby office. Once I connected the Ethernet cable, I was up and running. It was really that easy.
One nice thing with this unit is that you can run a speed test from the unit itself, with the front LED's displaying the estimated network performance. This was handy as I tried different outlet combinations to acheive the best performance. As a side note, I found that plugging the "Master" unit into an outlet as close as possible to the breaker box yeilded the best results. By putting the master as close to the break box as possible (electrica wiring distance) I was able to get a much better signal. I have the master unit in a downtairs room that is about 40' from the breaker box, and the secondary unit in an upstairs office that is about 65' feet from the breaker box.
Note that any powerline Ethernet product is susceptible to interference from other devices. Pay attention to the manual regarding the types of devies that can cause interference, and avoid ever pluggint the device into a surge protector, since that will greatly limit performance.
An additional nice feature of the Panasonic unit compared with DLink and NetGear is that the unit has a power cable. This allows me to plug it into "hidden" outlets, and then place the box in an easy to reach location. Both the NetGear and DLink products are a box that plugs directly into the outlet. This makes them more difficult to access, especially if you want to look at the box to see what it is doing. I like that the Panasonic can sit nicely on the corner of my desk and I can see the lights. I also suspect that the Panasonic will operate cooler since it can be placed in locations where there is air flow all around the unit.
Performance will vary by house and situation. I have a gigabit network switch that connects my machine directly to a server. When I copy a 50 megabyte file to my server using Windows XP, it takes 8 to 9 seconds to copy a 50 megabyte file. Running the same 50 megabyte file copy to a machine on the HD-PLC network connection took about 27 seconds. This seems to be pretty good performance overall. Note that "speed test" is only as good as what is being tested. My test was a real world test under Windows XP copying a 50 megabyte ZIP file.

Click Here to see more reviews about: Panasonic BL-PA100KTA Ethernet Adaptor Starter Pack Includes two HD-PLC (High Definition Power Communication)

Click here for more information about Panasonic BL-PA100KTA Ethernet Adaptor Starter Pack Includes two HD-PLC (High Definition Power Communication)

Read More...

Cisco-Linksys PLUSB10 Instant PowerLine USB Adapter Review

Average Reviews:

(More customer reviews)I have one computer that has Winme and the other that has XP. I have has these adapters for around 1-2yrs and niether one of my computers ever had a problem with them.

Click Here to see more reviews about: Cisco-Linksys PLUSB10 Instant PowerLine USB Adapter

Get 28% OFF

Click here for more information about Cisco-Linksys PLUSB10 Instant PowerLine USB Adapter

Read More...

Cisco-Linksys PLEBR10 Powerline To Ethernet Bridge Review

Average Reviews:

(More customer reviews)As a networking "internals" guy, I was shocked to find that this product is fundamentally broken at the network layer.
What people are complaining about here is that the device suddenly stops working and must be unplugged and plugged back in again.
This is because the device is trying to be too smart, and is losing track of which power-line modules connect to which computers. Unfortunately, in doing so, it prevents the network-level broadcast facilities from working. The broadcast facility I'm talking about most (ARP, the address resolution protocol) would have automatically corrected the problem if the Linksys box wasn't so broken.
In essence, for all you tech guys and gals, is that a learning bridge should never "learn" the broadcast address.
If you have only PCs, and you load the Linksys driver, they do some magic to keep the devices from falling over dead... But if you mix in a non-pc (Linux, UNIX, Macintosh) using a hub off the end of your power-line device, you're guaranteed to be frustrated.
The symptoms are that some of the network works (whatever was working before the bridge tables got corrupted) and others stop working with no explanation. The box "selectively" forwards traffic, and becomes deaf to other traffic.
It's like being at a cocktail party, and having every third person not be able to hear you, and saying "Over here!" (as ARP does) doesn't help either.
Ugh. In my experience, this is somewhat typical of Linksys products... If you have a windows PC, you're fine. If you have anything else, they won't talk to you.
I switched to the Siemens power-line module, and it has been working just fine for me.

Click Here to see more reviews about: Cisco-Linksys PLEBR10 Powerline To Ethernet Bridge

The Linksys Instant PowerLine EtherFast10/100 Bridge offers a complete Internet connection solution for your home powerline network. The PowerLine Bridge makes sharing your broadband access easier than ever. Build a strong and simple-to-use home network by taking advantage of the most pervasive home networking mediumpowerlines.The PowerLine Bridge is ideal for users who already have a router. It can be plugged into an Ethernet port on a router to equip a network with powerline capabilities and take advantage of the routers features. The PowerLine Bridge can also plug directly into a cable or DSL modem to allow Internet access and data transfer rates up to 14Mbps over home powerlines.With the PowerLine Bridge, create a network in no time at all to share an Internet connection (a router may be required), files, and printers, or even play multi-user network games at blazingly fast speeds. Its easy, convenient, and cost-effective.

Click here for more information about Cisco-Linksys PLEBR10 Powerline To Ethernet Bridge

Read More...

NETGEAR WGXB102NA Wireless G Router Wall Pg Review

Average Reviews:

(More customer reviews)I use a wireless router in the house with great success. However, the range is pretty weak or my house is too big, and I am pretty sure it's not the latter. As a result, I researched a variety of solutions, none of which seemed too appealing to implement (bridges, wireless range extenders, new RF antenna, etc). It just all seemed too complicated, and I consider myself pretty tech savvy.
Fortunately, I was reading through some tech reviews and stumbled upon the Netgear Wireless wall-plugged router kit. It seemed like it was pretty simple to setup and easy to use. Well, I can report that it is exactly that.
There is no software to install at all. You simply plug in the ethernet cable from the cable modem in one room into the Netgear plug and then plug that into the wall. Check that all three green lights are lit and you are good to go.
The next step is to take the second half of the Netgear plug into the desired room in the house and plug it into an electric socket. When its three lights are lit, you have a connection and are good to go in there. My laptop computer picked up wireless signal immediately and I was surfing the web in no time flat. Basically, it was flawless.
So, WHY am I am only giving it four stars? Two reasons:
First, the wireless range of the Netgear plug is pretty weak. It definitely doesn't have the power of my main wireless modem. Then again, it doesn't have an antenna AND it still works, so it's no big deal; it's just not perfect.
Second, the Netgear plugs need to be plugged in somewhat near each other to function correctly and get the Homelink green light to turn green. When the Netgear plugs were plugged in on opposite ends of the house (what I was hoping for to maximize range), it did not achieve a homelink connection. However, when I moved the plugs to outlets that were closer together (but still outside my wireless routers range), it DID work. So, partial credit again here. While I cna't explain why it did not work, perhaps the electrical homelink signal degrades the farther the outlets are apart.
Anyway, everything is working pretty smoothly now and I am excited that I can get a signal in another area of the house that was not covered by internet previously.

Click Here to see more reviews about: NETGEAR WGXB102NA Wireless G Router Wall Pg

The NETGEAR WGXB102 Powerline Wireless Range Extender includes everything you need to provide wireless access to an existing network using only power outlets. You can now extend an internet connection to even the farthest reaches of your home without a tangled mess of cables.
Elegant Design and Simple to Install The WGXB102 is a kit that comes with two devices, the Wireless Range Extender (WGX102) and the Powerline Network Bridge (XE102).
The WGX102 is a small silver-colored box with rounded edges that has no wires or ports of any sort. Installation is truly plug and play: simply plug the device into the outlet and you have a wireless network originating from that spot.
The XE102 is a similarly shaped box that connects from an existing wired or wireless router to the power line. It then sends a network connection between connected NETGEAR Powerline devices. In addition to the included WGX102, other compatible devices include NETGEAR's XE104, XE103, XEPS103, and XE102, all sold separately.
Fast and Secure The WGX102 complies with both the Homeplug 1.0 and 802.11g wireless standards for compatibility with a wide range of devices. Since 802.11g is backwards compatible with 802.11b, you don't have to worry about your older devices that might not yet support the newer standard. The WGX102 supports 64-bit and 128-bit WEP encryption as well as WPA so you can be sure your data is safe from prying eyes. Additionally, it has VPN (IP-Sec and PPTP) passthrough, as well as the option to turn Wireless SSID broadcast on and off.
The NETGEAR WGXB102 Powerline Wireless Range Extender is backed by a 2-year warranty.
What's in the Box WGX102 wireless range extender, XE102 Powerline network bridge, ethernet cable, two setup CDs, installation guide, and warranty/support information card.

Click here for more information about NETGEAR WGXB102NA Wireless G Router Wall Pg

Read More...

Zinwell 200 Mbps Digital Home Powerline Ethernet Adapters 1-port Bridge Twin Pack Review

Average Reviews:

(More customer reviews)Literally unwrapped the two units, plugged them into two different power surge protectors in different rooms, connected the ethernet cables...and that was it. They have been operating flawlessly since then.

Click Here to see more reviews about: Zinwell 200 Mbps Digital Home Powerline Ethernet Adapters 1-port Bridge Twin Pack

Get 22% OFF

Click here for more information about Zinwell 200 Mbps Digital Home Powerline Ethernet Adapters 1-port Bridge Twin Pack

Read More...

ZyXEL PLA470 200 Mbps Powerline HomePlug AV Desktop Adapter with Built-In 4-Port 10/100 Fast Ethernet Switch Review

Average Reviews:

(More customer reviews)It's true that HomePlug AV nodes cannot intercommunicate with HomePlug 1.0 nodes. ZyXEL and most, if not all, other HomePlug AV hardware manufacturers are derelict in not pointing out that fact. As an engineer who works with HomePlug almost full-time, I know that AV kicks 1.0's tail in terms of bitrate versus SNR. That doesn't excuse ZyXEL's dereliction, but it gives you cause to ponder retiring your HomePlug 1.0 hardware and replacing it with HomePlug AV hardware. Even if you think you won't benefit sufficiently from HomePlug AV's nominal 14x bitrate improvement, you might need AV's ability to reach more electrical outlets in your building with a bitrate that is usable for your application.
There's another compatibility matter to be aware of. When I examined a new PLA-470 the other day, I was disappointed, but not surprised, to find that the version of firmware installed in the HomePlug AV chipset is an old, pre-standard version, 1.4.5, that is not truly HomePlug-AV compliant and, more importantly, that cannot intercommunicate with subsequent firmware versions. I have not checked to see whether ZyXEL provides the means to upgrade the firmware of the HomePlug-AV chipset. The newest version is 3.0.5. For more detail on the topic of HomePlug-AV-chipset firmware, see my review of the Linksys PLE200.

Click Here to see more reviews about: ZyXEL PLA470 200 Mbps Powerline HomePlug AV Desktop Adapter with Built-In 4-Port 10/100 Fast Ethernet Switch

Get 18% OFF

Click here for more information about ZyXEL PLA470 200 Mbps Powerline HomePlug AV Desktop Adapter with Built-In 4-Port 10/100 Fast Ethernet Switch

Read More...

NETGEAR XE102 Wall-Plugged Ethernet Bridge Review

Average Reviews:

(More customer reviews)I tested these between the two units in a duplex apartment building. Each apartment has its own electrical meter and main panel, although they share the same 240Volt service from the street. Result: Works great! The speeds varied slightly depending on the outlets into which these were plugged, but were always much faster than my 3 Mb/s cable modem connection, and were also consistently faster than 802.11b wireless. Supposedly, the connection quality is not limited by distance, and the signal travels just fine across circuit breakers, fuses, and even between the two 120V legs of a 240V service connection, as I confirmed. In a big building, or one with many obstructions, wireless is a hit-or-miss solution, whereas this seems to be rock-solid.

Click Here to see more reviews about: NETGEAR XE102 Wall-Plugged Ethernet Bridge

The NETGEAR XE102 Wall-Plugged Ethernet Bridge lets you easily extend a network using just the existing electric lines of your home, eliminating the need to run unsightly Ethernet wires all over your house or apartment.
True Plug and Play Installation To extend a network using the electric lines in your home, you need two XE102 units. Simply plug one of them into a wall outlet and connect it to your router with an Ethernet cord. Plug the second one into any wall outlet that is electrically connected to the first and you have an instant Ethernet port to plug a computer, gaming console, or other networkable device with an RJ-45 Ethernet plug. You can create as many network connections as you need by connecting more XE102 units. The device has easy-to-read icon LEDs for status information at a glance.
The XE102 has a 10BASE-T Ethernet jack and supports the 10 Mbps HomePlug 1.0 standard. It uses Forward Error Correction (FEC) and Automatic channel adaptation to ensure the integrity of the data. In order to enable encryption, you need a computer with Windows XP, 2000, ME or 98.
The NETGEAR XE102 Wall-Plugged Ethernet Bridge is backed by a 3-year warranty.
What's in the Box XE102 Wall-Plugged Ethernet Bridge, installation guide, Ethernet cable, resource CD, and warranty/support information card.

Click here for more information about NETGEAR XE102 Wall-Plugged Ethernet Bridge

Read More...

NETGEAR Powerline AV+ 200 Adapter Kit XAVB2501 Review

Average Reviews:

(More customer reviews)When I saw this item, I leapt at the opportunity to get my hands on a set of these, in hopes that this Netgear Powerline AV+ 200 Adapter Kit would give me a stronger Internet connection than I was getting wirelessly to my Wii. I've only just recently begun subscribing to Netflix, and the signal that I've been getting wirelessly has left something to be desired with regards to image quality of downloaded media from the Instant queue.
When I received my package, I couldn't wait to get these in place and put them to use. Luckily for me, setting these up was a breeze. The adapters themselves are pretty tall, and fairly wide, as you probably determined by the photo - about 2.5" wide, 5" tall, and about 1.75" deep. They fit VERY snugly into the outlets (I placed each of mine in the bottom outlet, so I could still access the top outlet), so be prepared to apply a little force to the adapters if you're trying to get them into outlets that are in an awkward spot to get to.
The instructions also clearly state that these adapters need to be placed in the wall outlets themselves, NOT into a power strip that items are then connected to. Looking at them, it's pretty obvious to me that the recommendations are wisely made. I simply wouldn't want to fry these adapters out if I put them into an outlet that didn't look adequate for them. So, I unplugged the power strip that I'd had plugged into each outlet that the adapters were going to be occupying, connected one of the enclosed Ethernet cables to each adapter, popped the adapters into the outlets, looked for the LED indicators that showed that these were working well where I'd put them, plugged the power strips into each adapter's built-in outlet (ingenious!), and I was in business! It was then as simple as connecting the Ethernet cable from the adapter near my computer to a port on my wireless router, and then connecting the Ethernet cable from the adapter near my entertainment center to my Wii and its LAN USB adapter, to create the network connection.
When I first got my Wii and was considering my Wii-Internet connectivity options, I'd thought about buying a ridiculously long Ethernet cable to wind around my apartment and its walls, and the challenge it would be to staple/nail around the cord to keep it in place. I could've done that, but I knew how unsightly it would be, so I opted to go for the wireless router that I now have (and still use and enjoy), and connected my Wii to the 'net that way. It was more than adequate, too, until I started my Netflix subscription, and could literally see that my wireless signal was lacking, for Netflix-viewing purposes. Thanks to this adapter kit and a Wii-compatible LAN adapter, though, I've now got the best picture that I've seen on the Netflix Instant queue accessed through my Wii, and a super-strong connection to the Internet with it. Long story short, I couldn't be more pleased by just how well these adapters do what they say they will. I remember originally thinking, "there's no way that these things can make an Internet connection without them being directly connected to each other with a cable." Netgear, you've proven me wrong, and I'm thrilled that you did! Two thumbs up!
* UPDATE*
It's knocking on a year after my install of these NETGEAR Powerline AV+200 adapters, and I'm still happily using them. Perhaps even better, I'm still LOVING them! They continue to provide a strong and consistent signal to my Wii, which I still use daily to watch TV/movies on via Netflix.
If you happen to be having any viewing quality issues, be sure that you've got fast enough Internet service. The NETGEAR adapters will transmit everything they possibly can, as reliably as they can, but if your Internet is just not fast enough, your viewing quality might be a bit on the grainy/pixellated side. I had been using such low-grade Internet when I initially installed these that it wasn't even listed in my cable provider's options - I had to specifically request it in a sales call with them - but I've since bumped my service up to one of the top two options, and that totally fixed the issues that I had with viewing quality.
These NETGEAR adapters were great last May when I first got them, and, eight months later, they're still keeping my entertainment center up-to-date with the latest technology, and doing so beautifully! Good stuff!

Click Here to see more reviews about: NETGEAR Powerline AV+ 200 Adapter Kit XAVB2501

NETGEAR's Powerline AV 200 Adapter extends a high speed Internet connection to any power outlet (2 units required, can purchase 2 unit kit in part# XAVB2001) , Perfect for connecting HDTVs, Blu-ray players, DVRs, PCs and game consoles to your home network and the Internet, Compact design with push-button security, Just plug into any electrical outlet.NETGEAR Green Features: Automatically powers down when not connected or not in use, Disable LEDs to help save energy,Packaging manufactured with at least 95% recycled materials.Disclaimers:1 Requires use of HomePlug AV compatible Powerline devices (two XAV2001 devices included).

Get 11% OFF

Click here for more information about NETGEAR Powerline AV+ 200 Adapter Kit XAVB2501

Read More...

NETGEAR Home Theater Internet Connection Kit (Black) Review

Average Reviews:

(More customer reviews)I have only had this for a few days, but hookup is a breeze (took about 5 minutes from openning the box to fishing wires under my furniture behind the TV), and it is much faster than wireless G. I am streaming Netflix through my TivoHD without undue buffering, and at the claimed Netflix full HD quality. The utility software included with the product allows the user to turn off the three LEDs on the four port switch, implement security on the devices, and create network priorities if there are multiple adapters on the network. The utility software scans the powerline network and details the speed at which the network is operating. My speeds vary between 72 mpbs to 88 mbps in my 3,100 sqft house that is about 7 years old. My network router is upstairs and my home theater is downstairs. Longevity of the device is yet to be determined since I have only had it a few days, but so far I am very pleased with the product.
***UPDATE***
I had a lamp that operated by touch to turn it on and off. It kept turning on by itself after installing the netgear powerline adapter. Well, after unplugging the lamp from the wall, I am getting about 160 mbps transfer speeds on my network to my home theater. Its fast, stable, and streams video like crazy.

Click Here to see more reviews about: NETGEAR Home Theater Internet Connection Kit (Black)

Turn Any Electrical Outlet into a High-Speed Home Network Connection NETGEAR's Home Theater Internet Connection Kit (XAVB1004) is a convenient solution for extending your home network by using standard electrical outlets. This kit delivers the devices you need to set up an Internet connection in any room without running new wires.The XAVB1004 connects up to four (4) devices to your network: Game consoles including Xbox 360 and Playstation 3 Networked attached storage devices including: NETGEAR ReadyNAS, Notebook PCs, Wired and wireless routers, TiVo, AppleTV,VUDU box, Desktop PCs, Slingbox, BD Live enabled Blu-ray player Features Turn a power outlet into a high speed Internet and home network connection Connects up to 4 devices Delivers fast 200 Mbps speed, fast enough to stream HD videoFor use with both wired and wireless routers and gateways Simply plug an XAV101 into your router and connect as many as 4 Ethernet-ready devices to the XAV1004 Port-based Quality of Service (QoS), ensures that the highest priority applications are allocated more bandwidth Red, yellow, green status LEDs indicate maximum data rate 128-bit AES data encryption ensures privacy and security, secure your Powerline AV network by just pushing a button Supports Windows Vista HomePlug AV compatible

Click here for more information about NETGEAR Home Theater Internet Connection Kit (Black)

Read More...

NETGEAR MCAB1001 MoCA Coax-Ethernet Adapter Kit (Black) Review

Average Reviews:

(More customer reviews)I've been waiting for the Netgear MoCA Kit for awhile now. There were other solutions, but I had high hopes for this model. As it turns out, it was worth the wait.
First things first, installation was a snap. I followed the instructions and all status lights were on and I was able to use a computer on the other end within minutes. Awesome, but now the TVs were not working. I went into the configuration and turned off All Pass and the problem was fixed. There were also options to adjust frequency, but I did not have to go that far. My setup includes a cable box and DVR and the MoCA works great with them. I'll be adding a small switch to allow for connecting gaming consoles and other devices soon.
I have not tested the transfer speeds extensively, although the Adapters are saying they are at 252 Mbps (out of a max of 270 Mbps). I do have some doubts that the speed is that high, but it's not too far off. Files transferred quickly and I was streaming photos, music, and videos from my home server within minutes to my HDTV in the other room. While I did not test all kinds of video file types, I was able to stream 720p and 1080i without trouble and no lag at all. Of course, if you had other devices pulling bandwidth, then it might be an issue.
You receive 2 coax cables and 2 ethernet cables in the kit. However, it would have been nice to have the cables a bit longer. The configuration pages are fairly straight-forward. Although, it requires you to hook a computer directly up to the devices in order to access the setup options, which isn't a big deal because after you get it going I don't really think you will be doing any additional configuration. The lights on the front of the adapters are a bright blue, but you can turn them off by hitting a button on the back. The units appear to stay relatively cool, but do warm up a bit when you are passing traffic through them heavily. It's nothing abnormal though.
Overall, this setup is highly recommended for those that do not want to run CAT5 through their house. The cost is decent and the setup is very easy. The units provide you with an easy solution for providing network access to your HDTV, gaming console, or other devices.
UPDATE 1/2/2010: It's been almost eight months since buying and installing the Netgear MoCA kit and I am providing this as an update to my review. I have been using them to stream media (video, music, photos) from my home server to my HDTV on another floor. I have also added a small switch and an Xbox 360 along with the HDTV. Streaming has been going very well and all internet access to my Xbox 360 has been great. While there are days I have to reset my other network equipment for various reasons, the NetGear MoCA devices keep on trucking. I never have a problem out of them and they are always performing top notch! Still highly recommended.

Click Here to see more reviews about: NETGEAR MCAB1001 MoCA Coax-Ethernet Adapter Kit (Black)

Turns coaxial cable outlets into a high-speed Ethernet network connection; Advanced Quality of Service (QoS) supports uninterrupted HD video, gaming and high-speed networking; For use with both wired and wireless routers and gateways; Delivers up to 270 Mbps transfer speed; Connect an Xbox360, PlayStation 3, Blu-ray player, Apple TV, VUDU box, TiVo, Slingbox, DVR, NETGEAR ReadyNAS storage, desktop, or notebook PC; Works with DSL broadband in homes wired for cable; Data encryption ensures privacy and security; Not compatible with satellite television installations (e.g., DIRECTV, DISH Network).

Get 55% OFF

Click here for more information about NETGEAR MCAB1001 MoCA Coax-Ethernet Adapter Kit (Black)

Read More...