Average Reviews:
(More customer reviews)Once you have it setup it works flawlessy. Problem is setting it up for the first time. Documentation is not user friendly to the non-tech savvy. I'm using it as a wireless bridge / access point with my Sony blue-ray player. I already have a Linksys wireless router using WEP encryption (forced to use this because my XBOX 360 doesn't support WPA). To make it easy for others doing the same thing use the following steps:
1. Change your pc or laptop's ethernet adapter's IP address to 192.168.1.3 To do this on Vista or Windows 7 you open you network sharing center then you open your ethernet LAN adapter settings (or manage network connections in Vista). Select the Internet protocol v4 (IPv4) and go into properties. Manually put in the IP address with subnet mask of 255.255.255.0 and don't worry about the gateway address.
2. Connect your WAP3205 to your pc/laptop with the ethernet cable that is provided. Of course make sure you plugged in the power to it or your going nowhere. Open up your preferred browser (IE, firefox, netscape, etc.) and then type in the address bar 192.168.1.2 and now you will be connected to the WAP3205. Type in the default password of 1234, you are now prompted to change your password to whatever you want it to be.
3. Now that your in the WAP3205 click on Expert Mode. When in this mode on the far left you will see Status and below it Monitor, Configuration and Maintenance. Click on Maintenance and then hit the plus sign in front of Maintenance once you are in. Go to the last option of Sys OP Mode then select Client Mode and hit apply.
4. Go back to the far left and hit configuration then go to Wireless LAN. You will see tabs for Profile, Site Survey and WPS. Hit the Profile tab and then hit the Add button. Type in your network name / SSID and then select your security drop down box. Select WEP if you have a setup like me with the XBOX 360 or if you don't care about security select the no security option. Type in your passphrase that you use for your router's security or the actual 128 bit security code (or 64 bit if that is what you use) and hit apply. Then select your newly created profile and hit the activate button. If it's configured correctly you will get a green check. Now your done on this end.
5. Disconnect your WAP3205 from your pc/laptop and change your pc or laptop's ethernet adapter settings back to whatever it was before.
6. Go to your blue-ray player and disconnect the power cord for about a minute or more. Connect the WAP3205 to the blue-ray player with the ethernet connection and power your blue-ray player back on. The blue-ray player will automatically pick up the network settings from the WAP3205 and you will be done.
Hope this is helpful and if you don't have an XBOX 360 or if you use WPA for security the setup should be easier.
So far so good with the Zyxel WAP3205...I had used the Linksys WET610N (2 separate units) and they both failed. The first one worked a couple of days before the wireless stopped working and the second one's wireless failed right out of the box. The WET610N's are way easier to configure but they are too expensive and for me totally unrealiable. The WAP3205 is a steal and worth the effort when you consider the rock solid connection I have now, besides it was less than half the price of the Linksys. It's not as nice looking as the Linksys that's for sure but the main thing is it works as described.
Click Here to see more reviews about:
ZyXEL WAP3205 Wireless N access point, Ethernet client, and universal repeater
Get 27% OFF
Click here for more information about ZyXEL WAP3205 Wireless N access point, Ethernet client, and universal repeater
